Compaq Presario 1800 Presario Selct 1800 Series Maintenance and Service Guide - Page 69
Removing the Fan Assembly
View all Compaq Presario 1800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Maintenance & Service Guide Presario 1800 Series Models: 1805 and 1810 | Home Page | Notice | Preface | Product Description | Troubleshooting Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications Pin Assignments | Battery Pack Operations Removing the Fan Assembly Electrostatic Discharge Service Considerations Cables and Connectors Preparing the Computer for Disassembly Battery Pack Palmrest Cover with Touch Pad Keyboard Heatspreader Modem Processor Status Panel Interface Board Hard Drives Battery Charger Board CD or DVD Drive Display Panel Assembly Upper CPU Cover Speaker Assembly Diskette Drive Fan Assembly Audio Board System Board Memory Module To remove the fan assembly, complete the following steps: 1. Prepare the computer for disassembly. 2. Remove the palmrest cover with touch pad. 3. Remove the keyboard. 4. Remove the heatspreader. 5. Remove the display panel assembly. 6. Remove the Upper CPU cover. 7. Disconnect the fan cable from the connector on the system board. Pull the fan from the chassis slot. To remove the fan gasket, complete the following step: Pull the gasket from the fan. Replace the fan gasket, place the fan at a 15 degree IMPORTANT: angle, and push forward to replace the fan assembly. To replace the fan assembly, reverse the previous procedures.