Compaq Presario 1900 Presario 1900 Series Maintenance and Service Guide - Page 84
Clearing the, Power-on, Password - power cord
View all Compaq Presario 1900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Maintenance & Service Guide Presario 1900 Series Models: 1900T, 1905, 1906, 1910, 1915, 1919, 1920, 1922, 1925, 1926, 1927, 1928, 1929, and 1930 Before You Begin Removal Sequence Product Description Specifications Troubleshooting Pin Assignments Parts Catalog Battery Operations Index Troubleshooting Clearing the Power-on Password Clearing the power-on password requires removing all Setup attributes that are programmed in the CMOS. If the password is not known, clear it by performing the following steps: 1. Turn off the computer. 2. Disconnect the power cord. 3. Remove the battery pack . 4. Remove the keyboard. 5. Disconnect the backlight cable from the connector on the system board. 6. Using a conductive piece of material (piece of wire or tool) simultaneously make contact with the two pads located at R37 on the system board or remove the RTC battery located under the battery charger board for 5 seconds. The password, together with other Setup attributes, will be cleared. 7. Reassemble the computer. 8. Turn on the computer to verify that the poweron password has been cleared. If it has not been cleared, repeat Steps 1 through 7.