Compaq ProLiant 1850R Modifying Physical Cluster Resources in a Compaq Paralle - Page 7

Modifying Physical Cluster Resources in a Compaq Parallel Database Cluster 7 A symbolic link worksheet corresponding to the above configuration is in the following table. Note that paritition1 on each disk is used for the small, identifiable partitions discussed in the Simplifying Detection of the Issue section above; and therefore, partititon1 is not shown in the symbolic links worksheet. Table 2. Modified Oracle Symbolic Links Worksheet Symbolic Link OPS_log1t1 OPS_log2t1 OPS_sys01 OPS_usr01 OPS_rbs01 OPS_tmp01 OPS_log1t2 OPS_log2t2 OPS_log1t3 (new volume) OPS_log2t3 (new volume) OPS_cntr01 OPS_cmdisk Node1 Harddisk2 Partition2 Harddisk2 Partition3 Harddisk2 Partition4 Harddisk3 Partition2 Harddisk3 Partition3 Harddisk3 Partition4 Harddisk4 Partition2 Harddisk4 Partition3 Harddisk5 Partition2 Harddisk5 Partition3 Harddisk6 Partition2 Harddisk7 Partition2 Node2 Harddisk1 Partition2 Harddisk1 Partition3 Harddisk1 Partition4 Harddisk2 Partition2 Harddisk2 Partition3 Harddisk2 Partition4 Harddisk3 Partition2 Harddisk3 Partition3 Harddisk4 Partition2 Harddisk4 Partition3 Harddisk5 Partition2 Harddisk6 Partition2 Finally, after the symbolic link table file has been modified, it needs to be run through an Oracle utility called SETLINKS. Refer to the Oracle Parallel Server Getting Started Release 8.0.5 for Windows NT manual and to other appropriate Oracle8 documentation on the location and parameters of the SETLINKS utility. ECG001/1298