Compaq ProLiant 2500 Compaq ProLiant 2500 Family of Servers Maintenance and Se - Page 105

3-53 Attended Recovery For local or remote installations where it is desirable to supervise the recovery, ASR will log the error information to the Critical Error Log, reset the Server, test all memory, automatically de-allocate any bad memory blocks found, page you, boot the Compaq Utilities from the hard drive, and place the modem in auto answer mode. These utilities are placed on a special system utilities partition on the hard drive during the system configuration process. If a modem with an auto-answer feature is installed, you can dial in and remotely diagnose or re-configure the Server; otherwise, this can be done from the Server console. The requirements to use this level of the ASR feature are: s Operating System with ASR support s System Configuration Utility and Diagnostics Utility installed on the system partition of the hard drive s ASR configured to load the Compaq Utilities after reboot s Optional Hayes-compatible modem with auto-answer feature (only required for remote operations and paging) For remote operations, the administrator must have access to Compaq Insight Manager or a communications software package capable of terminal emulation to a local terminal with VT100 or ANSI terminal capabilities. NOTE: If the remote site is using something other than VT100 or an ANSI terminal emulator, it is still possible to configure remotely as long as the package contains either an ANSI terminal or VT100 terminal emulator set for 8 data bits, 1 stop bit, and no parity. However, additional setup not outlined in this document may be required, and functionality may be reduced. ASR Security The standard Compaq ProLiant security password features function differently during ASR than during a typical system startup. During ASR the system will not prompt for the Power-On Password. This allows the ASR to restart the Operating System or Compaq Utilities without user intervention. To maintain system security, the Server should be set to boot in Network Server Mode (an option in the System Configuration Utility). This option ensures that the Server keyboard is locked until you enter the Keyboard Password. You should also select an Administrator Password (an option in the System Configuration Utility). During attended ASR (local or remote), you must enter this Administrator Password before any modifications can be made to the Server configuration. Compaq ProLiant 2500 Family of Servers Maintenance and Service Guide