Compaq ProLiant 2500 Compaq ProLiant 2500 Family of Servers Maintenance and Se - Page 83
Tape Drive Test Error Codes, Table 3-13
View all Compaq ProLiant 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
3-31 Error Code 1900-xx 1901-xx 1902-xx 1903-xx 1904-xx 1905-xx 1906-xx Table 3-13 Tape Drive Test Error Codes Description Tape ID failed Tape servo write failed Tape format failed Tape drive sensor test failed Tape BOT/EOT test failed Tape read test failed Tape write/read/compare test failed Recommended Action The following steps apply to error codes 1900-xx through 1906-xx: 1. Replace the tape cartridge and retest. 2. Check and/or replace the signal cable and retest. 3. Check the switch settings on the adapter board (if applicable). 4. Replace the tape adapter board (if applicable) and retest. 5. Replace the tape drive and retest. 6. Replace the system board and retest. Compaq ProLiant 2500 Family of Servers Maintenance and Service Guide