Compaq ProLiant 2500 Compaq ProLiant 2500 Family of Servers Maintenance and Se - Page 37
Removal and Replacement Procedures, Remove the four retaining screws from the drive cage.
View all Compaq ProLiant 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
2-24 Removal and Replacement Procedures MSG003EPS Figure 2-23. Removing the Drive Cage 3. Label and remove all hard drives from the drive cage. CAUTION: Be sure to label the drives before removing them so that they can be replaced in their original positions. Failure to do so will result in permanent data loss. 4. Remove the four retaining screws from the drive cage. 5. Pull out the drive cage with backplane board. Reverse steps 1 to 5 to replace the drive cage and backplane board.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2-24
Removal and Replacement Procedures
MSG003EPS
Figure 2-23.
Removing the Drive Cage
3.
Label and remove all hard drives from the drive cage.
CAUTION:
Be sure to label the drives before removing them
so that they can
be replaced in their original positions.
Failure to do so will
result in permanent data loss.
4.
Remove the four retaining screws from the drive cage.
5.
Pull out the drive cage with backplane board.
Reverse steps 1 to 5 to replace the drive cage and backplane board.