Compaq ProLiant 2500 Compaq ProLiant 2500 Servers Installation Guide - Page 41
Installing an Expansion Board, Remove the Top Access Panel.
![]() |
View all Compaq ProLiant 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
3-13 Installing an Expansion Board To install an expansion board, refer to one of the following installation sources: For a text and illustration procedure, refer to the installation documentation that came with the option kit. For a text only overview of the procedure, refer to the procedure below. For an illustration overview of the procedure, refer to the Hardware Installation and Configuration poster included in the shipping box or to the Expansion Board Installation Hood Label located on the inside of the Side Access Panel. 1. If the computer is on, turn it off and disconnect the power cord. 2. Disconnect any other external equipment connected to the computer. 3. Remove the Top Access Panel. 4. Press on the top of the expansion slot latch and open the latch toward the rear of the expansion slot cage. 5. Remove the expansion slot cover . CZR-025.EPS 3 1 2 Figure 3-9. Opening Expansion Slot Latch and Removing Slot Cover Compaq ProLiant 2500 Servers Installation Guide
![](/manual_guide/products/compaq-proliant-2500-compaq-proliant-2500-servers-installation-guide-8ce4514/41.png)