Compaq ProLiant 2500 Compaq ProLiant 2500 Servers Installation Guide - Page 48
Removable Media Drive Bays
![]() |
View all Compaq ProLiant 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
3-20 Overview of Installing ProLiant 2500 Server and Hardware Options Removable Media Drive Bays All ProLiant 2500 models ship standard with four non-hot-pluggable, removable media drive bays. The top two bays are occupied with a 3.5-inch diskette drive and an IDE CD-ROM drive; the bottom two half-height 5.25-inch bays are vacant. Two half-height removable storage devices such as tape or hard drives can be installed in the bottom two removable media drive bays. Also, one full-height storage device such as a DLT tape drive can be installed in the area occupied by the bottom removable media drive bays. To install a device in this area and to cable the device, refer to the installation documentation that came with the drive. The illustrations below provide only an overview of removing the blank panel and inserting a storage device. Figure 3-15. Removing Blank Panel CZR-048.EPS
![](/manual_guide/products/compaq-proliant-2500-compaq-proliant-2500-servers-installation-guide-8ce4514/48.png)