Compaq ProLiant 2500 Compaq ProLiant 2500 Servers Installation Guide - Page 87
Powering Up and Configuring, the Server, Accessing the Processor Board, and I/O Tray
![]() |
View all Compaq ProLiant 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
4-28 Overview of Installing ProLiant 2500R Server and Hardware Options 3. If you install a switch box in the rack, route the CPU-to-switch-box cables to the switch box. 4. Bundle all of the cables, including the power cable, and tie them to the cable management arm. 5. If you are going to route cables to the other side of the rack, attach the bundled cables to the cable support and join the other cables in the opposite cable channel. 6. Extend the bundled cables down the rack's cable channel. Before loading another component, be sure to secure the server to the rack using the face plate thumb screws. Powering Up and Configuring the Server After the cables have been connected, you are ready to power up the server. Refer to Chapter 3, "Overview of Installing ProLiant 2500 Server and Hardware Options," for the power-up and configuration procedures. Accessing the Processor Board and I/O Tray To service your rack-mounted server, you need access to the processor board and the I/O tray, as shown in the following sections.
![](/manual_guide/products/compaq-proliant-2500-compaq-proliant-2500-servers-installation-guide-8ce4514/87.png)