Compaq ProLiant 5000 Configuring the Compaq ProLiant 5000 for Microsoft Window - Page 15

13 The NetFlex-3 driver currently supports these controllers when configured with one of the following modules: t 10Base-T UTP/BNC Module t 100VG-AnyLAN UTP Module t 10/100Base-TX UTP Module The NetFlex-3 driver also supports the following non-modular controllers: t Compaq Netelligent 10/100TX PCI UTP Controller t Compaq Netelligent 10T PCI UTP Controller Benefits of using Compaq developed network device drivers include: s Support for full-duplex operation in 10BaseT and 100Base-TX environments. Full duplex allows simultaneous two-way transmission between nodes while eliminating collisions. The performance transmission and efficiency are increased by doubling the bandwidth of 10Base-T cabling to 20 megabits/second (Mb/s). s NetFlex Advanced Registry Parameters that support your Windows NT configuration are added to the Windows NT Registry with default values. These parameters should not be changed. However, you may modify optional parameters, if needed. A complete list of the parameters and a description for each is included in the Compaq SSD for Windows NT NTREADME.HLP file. CAUTION: Compaq cautions you to modify Registry Parameters at your own risk. Using the Registry Editor incorrectly might cause serious, system-wide problems. This includes registry corruption that might cause you to have to reinstall Windows NT. s Support for Compaq Insight Management Agents for Windows NT.