Compaq ProLiant 5000 Configuring the Compaq ProLiant 5000 for Microsoft Window - Page 18

16 Configuring the Compaq ProLiant 5000 for Microsoft Windows NT Environments s Notification of Redundant Power Supply status s Checking of the Real Time Clock s Bus Utilization Statistics This device driver is required to support Compaq Insight Management Agents for Windows NT 3.5x. The System Management driver depends on the Compaq HAL for support. If the System Management driver is installed, the Compaq HAL is automatically installed at the same time. You will need the Compaq SSD for Windows NT to install the driver and the Compaq System Configuration Utility to configure and enable the driver. Compaq Standby and Online Recovery Server Option Support The Compaq Standby and Online Recovery Server Option is designed to improve the fault recovery time of a mission-critical server. If the Primary Server fails, a method is in place to provide the automatic switchover of the ProLiant Storage System to a Secondary Server. Before you can use the Compaq Recovery Server Option support with Microsoft Windows NT Server Version 3.5x you must install the Compaq Recovery Server Option Kit (PN 213187-001) from Compaq. You will need: s Compaq Insight Manager 3.0 or later s Compaq Insight Management Agents for Windows NT Version 3.5x The Compaq SSD for Windows NT v1.18 or later contains the support software for the Compaq Recovery Server Agent. However, you must configure the Recovery Server Option hardware components with the System Configuration Utility before the Compaq SSD for Windows NT Setup program can properly install the support software. The Compaq Recovery Server Agent software support must be installed after the system is running Windows NT 3.5x.