Compaq ProLiant 5000 Configuring the Compaq ProLiant 5000 for Microsoft Window - Page 7
Factory Configuration, Adding Additional Devices
![]() |
View all Compaq ProLiant 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
5 Following the recommended configuration tables minimizes the possibility of this occurring and having to reconfigure the NetFlex-3 controller and also gives the best performance configuration by dividing the bus load. Factory Configuration Table 1 describes the factory configuration with one Netelligent 10/100 TX PCI UTP network interface controller (NIC) installed in the secondary PCI bus (Slots 2-4) and one SMART-2 SCSI Controller installed in the primary PCI bus (Slots 5-8). Table 1 Factory Configuration, Array Models Device Bus Slot 10/100 TX PCI UTP Controller Secondary 2 SMART-2/P Array Controller Primary 5 Adding Additional Devices Tables 2 through 6 show recommended configurations to utilize as many as four SMART-2/P Array Controllers and two Netelligent 10/100 TX PCI UTP Controllers. Table 2 Recommended Three-Controller Configuration One 10/100 TX PCI UTP Controller, Two SMART-2 Array Controllers Device Bus Slot 10/100 TX PCI UTP Controller Secondary 2 SMART-2/P Array Controller Primary 5 SMART-2/P Array Controller Secondary 3
![](/manual_guide/products/compaq-221050001-configuring-compaq-proliant-5000-microsoft-windows-nt-environments-1ceddb5/7.png)