Compaq ProLiant 8500 ProLiant Server Troubleshooting Guide - Page 178
-6599, SCSI Hard Drive Test Error Codes, Table B-12
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
Test Error Codes 6500-6599, SCSI Hard Drive Test Error Codes The 6500 series of diagnostic error codes identifies failures with SCSI hard drives, SCSI hard drive controller boards, SCSI hard drive cabling, and system board functions. If the system uses a drive array controller, refer to "Array Diagnostic Utility" in Chapter 4 for more information about diagnosing problems with the drive array. Table B-12: SCSI Fixed Disk Drive Test Error Codes Error Code 6500-XX 6502-XX 6505-XX 6506-XX 6509-XX 6523-XX 6528-XX Description Recommended Action SCSI Disk ID drive types test failed SCSI Disk Unconditional Format test failed SCSI Disk Read test failed SCSI Disk SA/Media test failed SCSI Disk Erase tape test failed SCSI Disk Random Read test failed Media load/unload test failed The following steps apply to error codes 6500-XX through 6528-XX: 1. Run the server setup utility and check the drive type. 2. Replace the SCSI disk drive signal and power cables and retest. 3. Replace the SCSI controller and retest. 4. Replace the SCSI disk drive and retest. 5. Replace the system board and retest. HP Servers Troubleshooting Guide B-13