Compaq ProLiant 8500 ProLiant Server Troubleshooting Guide - Page 240
Check SCSI cables. If the, in your HP Smart Array
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 240 highlights
POST Error Messages Table C-13: 1700 Series POST Error Messages continued Error Code Audible Beeps Probable Source of Problem 1777-Slot X Drive Array - ProLiant Drive Storage Enclosure Problem Detected (followed by one or more of the following): None Environment threshold was violated on the drive enclosure. SCSI Port Y: Cooling Fan Malfunction Detected SCSI Port Y: Overheated Condition Detected SCSI Port Y: Side-Panel must be Closed to Prevent Overheating SCSI Port Y: Redundant Power Supply Malfunction Detected SCSI Port Y: Wide SCSI Transfer Failed SCSI Port Y: Interrupt Signal Inoperative SCSI Port y: Unsupported ProLiant Storage System Detected 1778-Drive Array resuming Automatic Data Recovery process None This message is displayed whenever a controller reset or power cycle occurs while Automatic Data Recovery is in progress. Action Check cooling fan operation by placing hand over fan. Be sure that internal plenum cooling fan in tower servers or storage systems is operational. If fan is not operating, check for obstructions and check all internal connections. Replace unit side panel if removed. If the ProLiant Storage System power LED is amber instead of green, this indicates a redundant power supply failure. Check SCSI cables. If the message indicates to check SCSI cables, compare your cabling against the diagrams in your HP Smart Array Controller user guide. If the routing is correct, replace cables on the specified port until the POST message is eliminated. No action necessary. continued C-60 HP Servers Troubleshooting Guide