Compaq ProLiant 8500 ProLiant Server Troubleshooting Guide - Page 214
position. Run BIOS, System Halted.
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 214 highlights
POST Error Messages Table C-9: 800 Series POST Error Messages continued Error Code Audible Beeps Probable Source of Problem 806-NVRAM has been reset Please power off the system and restore SW1.2 to the default position. Run BIOS Setup to set default values. System Halted. None The system configuration switch (SW1), position 2 has been turned on and the system configuration data has been cleared from CMOS. This switch must be returned to the default off position for normal operation and to save configuration setup data. The system must be reconfigured. Action 1. Remove power from the system. 2. Locate the system configuration switch (SW1). Refer to your server-specific user documentation for instructions. 3. Return position 2 to the off position. 4. Restart the system. 5. Press the F10 key to run the server setup utility and configure the system. 6. Select the primary operating system. 7. Set the date and time. 8. Complete additional configuration as needed. continued C-34 HP Servers Troubleshooting Guide