Compaq dx1000 Service Reference Guide: Compaq dx1000 Microtower PC - Page 48
Expansion Cards
View all Compaq dx1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Expansion Cards The computer has one standard PCI expansion slot that can accommodate an expansion card up to 17.46 cm (6.875 inches) in length. The computer also has two PCI Express x1 expansion slots and one PCI Express x16 expansion slot. Figure 6-11 Expansion Slot Locations Table 6-2 Expansion Slot Locations Item Description 1 PCI expansion slot 2 PCI Express x1 expansion slot 3 PCI Express x1 expansion slot 4 PCI Express x16 expansion slot NOTE: You can install a PCI Express x1, x4, x8, or x16 expansion card in the PCI Express x16 expansion slot. To remove, replace, or add an expansion card: 1. Prepare the computer for disassembly (Preparation for Disassembly on page 30). 2. Remove the computer access panel (Computer Access Panel on page 34). 3. Locate the correct vacant expansion socket on the system board and the corresponding expansion slot on the back of the computer chassis. 42 Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis