Compaq dx1000 Service Reference Guide: Compaq dx1000 Microtower PC - Page 71

Power Supply

Get Compaq dx1000 - Microtower PC PDF manuals and user guides View all Compaq dx1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 71 highlights

Power Supply 1. Prepare the computer for disassembly (Preparation for Disassembly on page 30). 2. Remove the computer access panel (Computer Access Panel on page 34). 3. Disconnect all power cables from the drives and from the system board. 4. Remove the four silver T15 screws that connect the power supply to the chassis. Figure 6-41 Removing the power supply screws 5. While pressing the tab in front of the power supply that holds it in place, pull the power supply up slightly to loosen it from the chassis. Figure 6-42 Removing the power supply 6. Rotate the power supply slightly toward the left and front of the unit, and then lift the power supply out of the chassis. To install the power supply, reverse the removal procedure. Power Supply 65

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
Power Supply
1.
Prepare the computer for disassembly (
Preparation for Disassembly
on page
30
).
2.
Remove the computer access panel (
Computer Access Panel
on page
34
).
3.
Disconnect all power cables from the drives and from the system board.
4.
Remove the four silver T15 screws that connect the power supply to the chassis.
Figure 6-41
Removing the power supply screws
5.
While pressing the tab in front of the power supply that holds it in place, pull the power supply up
slightly to loosen it from the chassis.
Figure 6-42
Removing the power supply
6.
Rotate the power supply slightly toward the left and front of the unit, and then lift the power supply
out of the chassis.
To install the power supply, reverse the removal procedure.
Power Supply
65