Craftsman 26302 Operation Manual - Page 12
Drill/driver - tool boxes
UPC - 009263020008
View all Craftsman 26302 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
KNOWYOUR DRILL/DRIVER (Fig. 1) the tool and in this operator's manual as well as a knowledge of the project you are attempting. _B,eWfoAreRNu|sNeGo:Tfhtehsisafepurosdeuocftth, isfparmodiliuacrtizreequyiroeusrasneulfndewristthanadllinogpoeftrhaetiinnfgormfeaattiuorneosn and safety rules. ADJUSTABLE TORQUE The drill has a 24-position clutch. The torque adjustment clutch can be turned to select the right amount of torque for your application. TWO-SPEED GEAR BOX The two-speed gear box is designed for drilling or driving at LO or HI speeds. A slide switch is located on top of your drill for selecting the appropriate speed. VARIABLE SPEED The variable speed trigger switch delivers higher speed with increased trigger pressure and lower speed with decreased trigger pressure. RATCHETING KEYLESS CHUCK The keyless chuck allows you to hand-tighten or release the drill bit in the chuck jaws. The ratcheting feature is designed to prevent the chuck from opening during operation. FORWARD/R EVERS E/CENTER LOCK The drill has a direction of rotation selector located above the trigger switch for changing the direction of bit rotation. Setting the trigger switch in the OFF (center lock) position helps reduce the possibility of accidental starting when not in use. AUXILIARY HANDLE (ONLY COMES WITH 320.26302) The drill is equipped with an auxiliary handle for ease of operation and to prevent loss of control. LED WORKLIGHT The LED worklight, located on the front of the drill base, illuminates when the trigger switch is depressed. This feature provides extra light for increased visibility. AWARN|NG: if any parts are broken or missing, DO NOT attempt cord or operate drill until the broken or missing parts are replaced. could result in possible serious injury. J to plug in the power i Failure to do so AWARN|NG: Do not attempt to modify this drill or create accessories not i J recommended for use with this drill. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious injury. _,WARN|NG: To prevent accidental starting that could cause serious personal injury, i always remove the battery pack from the drill when assembling parts. ! UNPACKING This product has been shipped completely assembled. I!1 Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included. !! Inspect the tool carefully to make sure no breakage or damage occurred during shipping. I!1 Do not discard the packing material until you have carefully inspected and satisfactorily operated the drill. I!1 If any parts are damaged or missing, please refer to the numbers listed on the back page of operator's manual. PACKING LIST Drill/Driver, Auxiliary Handle(ONLY AVAILABLE IN 320.26302), Double-ended Bit, Operator's Manual 12