Craftsman 26302 Operation Manual - Page 15

LED FUNCTIONS OF CHARGER/ADAPTER (Fig. 4) Fig, 4 LED iNDiCATOR BATTERY PACK RED LED GREEN LED _) (SHEi/ELO NANTUEALN) P. Hot/Cold On Off battery DEBFAETCTETRIVYE Defective i Flashing Off ACTION Charging will begin when battery returns to 32°F (0°C)-104°F (40°C) Battery pack or Charger/ Adapter is defective CHBAARTGTINEGRY [_ Charging Off Flashing Charging BATFTUELRLY Fully Off On charged Charging is complete Maintenance charging CHARGING A HOT BATTERY PACK If the battery pack is above normal temperature range, the red LED will be lit and the green LED will be off. When the battery pack cools down to approximately 104°F (40°C), the Charger/ Adapter will automatically begin charging. CHARGING A COLD BATTERY PACK If the battery pack is below the normal temperature range, the red LED will be lit and the green LED will be off. When the battery warms to a temperature of more than 32°F (0°C), the Charger/ Adapter will automatically begin charging. DEFECTIVE BATTERY If the Charger/Adapter detects a problem, the red LED will begin flashing and the green LED will be off. m If defective, remove and reinsert the battery pack in the Charger/Adapter. If the LED status reads "defective" a second time, try charging a different battery pack. m If a different battery pack charges normally, dispose of the defective battery pack (see Maintenance section). m If a different battery pack also indicates "defective," the Charger/Adapter may be defective. BATTERY CHARGING If the battery pack is within normal temperature range, the green LED will begin flashing and the red LED will be off. The battery pack will reach a full charge. The POWER BAR LED lights will cycle right to left during charging. This is part of the normal charging operation. The POWER BAR LED lights will not be displayed when the POWER BAR button is pressed while the battery pack is on the Charger/Adapter. BATTERY FULL If the battery pack is within normal temperature range, the green LED will be lit and the red LED will be off. The battery pack is fully charged and ready to use. The battery pack will fully charge, but will not overcharge, if left on the Charger/Adapter. The POWER BAR LED lights will not be displayed when the POWER BAR button is pressed while the battery pack is oil the Charger/Adapter. NOTE: Charger/Adapter may warm up with several continuous charge cycles. This is / J part of the normal operation of the Charger/Adapter. Charge in a well ventilated area. 15