Craftsman 28927 Operation Manual - Page 7
Slope, Sheet
View all Craftsman 28927 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Keys Slope Sheet (2) Keys Your new tractor has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. ADJUST SEAT When right or left hand is mentioned in this manual, it means, from your point of view, when you are in the operating position (seated behind the steering wheel). TO REMOVE TRACTOR FROM 1. Sit in seat. 2. Lift up adjustment lever (A) and slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down. CARTON 3. Release lever to lock seat in position. UNPACK CARTON 1. Cut along dashed lines on all four panels of carton. Remove end panels and lay side panels flat. 2. Remove protective materials from tractor hood and grille. IMPORTANT: Check for and remove any staples in skid that may puncture tires where tractor is to roll off skid. OH ECK BATTERY 1. Lift hood to raised position. NOTE: If this battery is put into service after month and year indicated on label (L) (label is located between terminals) charge battery for minimum of one hour at 6-10 amps. (See "BATTERY" in Maintenance section of this manual for charging instructions). NOTE: You may now roll your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid. WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects. TO ROLL TRACTOR OFF SKID (See Operation section for location and function of controls) 1. Raise attachment lift lever to its highest position, 2. Release parking brake by depressing brake pedal, 3. Place freewheel control in disengaged position to disengage transmission (See "TO TRANSPORT" in the Operation section of this manual), 4. Roll tractor forward off skid, 5. Remove banding holding the deflector shield up against tractor. 7