Craftsman 28986 Operation Manual - Page 12
Up The, Ground, Control, Levers
View all Craftsman 28986 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
SETTING UP THE GROUND SPEED CONTROL LEVERS 1. Loosen (do not remove) the hardware securing the ground speed control levers to the lever bases. 2. Raise the levers, aligning the upper hole in each lever with the upper slotted hole in the lever base. 3. Install the hardware as shown in Figure 3. Tighten to 15-17 ft-lbs (20-23 Nm). NOTE: Ground speed control levers must be adjusted prior to use. Refer to the "Ground Speed Control Adjustment" section. 20-23 Nm 15-17 ftqbs _ 5/16-18 (_ (_ 5/16-18 x 1-3/4 Figure 3. Setting Up the Ground Speed Control Levers 12
SETTING
UP THE
GROUND
SPEED
CONTROL
LEVERS
1.
Loosen
(do not remove) the hardware securing the
ground speed control levers to the lever bases.
2.
Raise the levers, aligning the upper hole in each lever
with the upper slotted hole in the lever base.
3.
Install the hardware as shown in Figure 3. Tighten to
15-17 ft-lbs
(20-23 Nm).
NOTE: Ground speed control levers must be adjusted
prior to use. Refer to the
"Ground
Speed Control
Adjustment"
section.
20-23
Nm
15-17 ftqbs
_
5/16-18
(_
(_
5/16-18
x 1-3/4
Figure 3.
Setting
Up the Ground
Speed Control Levers
12