Craftsman 32724611 Owners Manual - Page 9
Blowing, Feature
View all Craftsman 32724611 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Operation (continued) Blowing Feature Your Vac features a blowing port. It can blow sawdust and other debris. Follow the steps below to use your Vac as a blower. ,_k WARNING: Always wear safety eyewear complying with ANSI Z87.1 (or in Canada, CSA Z94.3) before using as a blower. WARNING: To reduce the risk of injury to bystanders, keep them clear of blowing debris. CAUTION: Wear a dust mask if blowing creates dust which might be inhaled. Craftsman recommended accessories are available at Sears retail stores and sears.com. The Sears 2-1/2" Blower Nozzle Stock No. 16933 is recommended for blowing debris. Push/PullHandle \ \ Hose End Blowing Port _Drum Handle hearing damage, wear ear protectors when using the Vac/Blower for extend_ekd tCimAeUToIrOaN:noiTsoy raerdeuac.e the risk of 1. Locate blowing port of your Vac. 2. Insert the locking end of the "Pos-ILock ®''hose into the blowing port of the Vac. The hose should snap into place. To remove the hose from the Vac, press the release button in the hose assembly and pull the hose out of the Vac inlet. 3. (Optional) Attach extension wand to opposite end of hose, then place the car nozzle on the wand. 4. Turn Vac on and you are ready to use your Vac as a blower. Car Nozzle (Optional) Extension Swivel End Of Hose Wand (Optional)