Creative 70EM910006000 Owners Manual - Page 2

SAFETY & REGULATORY INFORMATION The following sections contain notices for various countries: Notice for the USA FCC Part 15: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, this notice is not a guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try one or more of the following measures: U Reorient or relocate the receiving antenna. U Increase the distance between the equipment and receiver. U Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. U Consult the dealer or an experienced radio/ TV technician. CAUTION: To comply with the limits for the Class B digital device, pursuant to Part 15 of the FCC Rules, this device must be installed with equipment certified to comply with the Class B limits. All cables used to connect the computer and peripherals must be shielded and grounded. Operation with non-certified equipment or non-shielded cables may result in interference to radio or television reception. Modifications Any changes or modifications not expressly approved by the guarantee of this device could void the user's authority to operate the device. Notice for Canada This apparatus complies with the Class B limits for radio interference as specified in the Canadian Department of Communications Radio Interference Regulations. Cet appareil est conforme aux normes de CLASSE "B" d'interference radio tel que spe'cifie' par le Ministère Canadien des Communications dans les règlements d'interfèrence radio. Important Notice Your product has a serial number. Write this serial number down and keep it in a secure area. CAUTION Take care to prevent the accidental operation of your new speakers at excessive sound pressure levels! If you do not hear sound from your new speakers, keep the volume controls at a low levels while trying to restore sound. This will prevent accidental operation at uncomfortably loud levels. European Compliance This product conforms to the following: EMC Directive 89/336/EEC as amended by 92/31/ EEC and 93/68/EEC. Mains operated products for the European market comply with LVD Directive 73/23/EEC as amended by 93/68/EEC. DECLARATION OF CONFORMITY Manufacturer EU Importer E-MU Systems, Inc. 1500 Green Hills Road, Suite 101 Scotts Valley, CA. 96066 United States Creative Labs Ireland Ltd. Ballycoolin Business Park Blanchardstown, Dublin 15 IRELAND declares under its sole responsibility that the product Trade Name: Model Numbers: E-MU PS12/EM9100 has been tested according to the CISPR13 requirement and found compliant with the following standards: EMI/EMC: CISPR 13 : 2003, FCC Part 15 Subpart B Complies with Canadian ICES-003 Class B This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation. Ce matériel est conforme à la section 15 des régles FCC. Son Fonctionnement est soumis aux deux conditions suivantes: (1) Le matériel ne peut étre source D'interférences et Doit accepter toutes les interférences reques, Y (2) compris celles pouvant provoquer un fonctionnement indésirable. Compliance Manager E-MU Systems, Inc. April 27, 2006 Compliance Manager Creative Labs Ireland April 27, 2006 IMPORTANT SAFETY INSTRUCTIONS • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this product near water. • Clean only with a dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. • Do not defeat the safety purpose of the polarized or grounding-type plug. A grounding-type plug has two blades and a third grounding prong. The wide blade of the third prong are provided for your safety. If the provided plug does not fit into your socket, consult an electrician for replacement of the obsolete outlet. • Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. • Only use attachments/accessories specified by the manufacturer. • Unplug this apparatus from the during lightning storms or when unused for long periods of time. • Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK U DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE U DO NOT EXPOSE THIS APPARATUS TO DRIPPING OR SPLASHING FLUIDS, AND ENSURE THAT NO OBJECTS FILLED WITH LIQUIDS - SUCH AS VASES - ARE PLACED ON THE APPARATUS. The mains plug and appliance couple are used as the disconnecting devices. The speaker shall be placed near a socket outlet which is easily accessible and readily operable. FLAMES - No flame sources, such as lighted candles, should be placed on the apparatus. POWER SOURCES - This product is specifically designed for operation within the electrical range(s) specified on the provided power adapter and use outside of this range shall be at your own risk. Please contact your local electric utility company if you have any questions about the electrical voltage at your intended location of use. OVERLOADING - Do not overload wall outlets, extension cords, or integral power circuits as this can result in a risk of fire or electric shock. OBJECT AND LIQUID ENTRY - Never push any object through the product's openings, as they can result in a fire, electric shock or damage. Do not spill liquids on the product. SERVICING - Do not attempt to service the product yourself. Refer all servicing to qualified service personnel. PLACEMENT - Place the product on a stable surface or recommended stand, or sold with the product. Otherwise, the product may fall and cause injury to a person, and damage to the product. Follow the manufacturer's instructions for mounting the product. REPLACEMENT PARTS - When replacing parts, check that the service technician has used replacement parts specified by the manufacturer, or have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazards. SAFETY CHECK - After servicing or repairing the product, get the service technician to perform safety checks to be sure that the product is working properly. i