Creative 70EM910006000 Owners Manual - Page 8

Typical Setups This section shows some typical configurations for your PS12, including a single subwoofer setup, a dual subwoofer setup, and a single subwoofer surround setup. Single Subwoofer Setup The most common single subwoofer configuration is as shown below, where the audio source's right and left line outputs are connected to the right and left inputs of the subwoofer. The right and left satellite outputs are then connected to powered monitor speakers. If you use passive monitor speakers, you'll need to run the satellite outputs to a power amplifier, which in turn feeds your passive speakers. Powered Monitor Powered Monitor Left Mixing Console SUBWOOFER INPUTS SATELLITE OUTPUTS R L R L 80 100 90 120 60 55 flat LOWPASS FREQ (Hz) 0 180 PHASE 60 55 80 100 120 min max LEVEL 40 135 HIGHPASS FREQ (Hz) SUB HIGHPASS NORMAL FOOT SWITCH GREEN - ON RED - BYPASS OFF HIGHPASS STATUS R R L L E-MU PS12 Precision Subwoofer MODEL NO: PS12 INPUT VOLTAGE: 100V-120V 50/60HZ INPUT CURRENT: 2.5 A INPUT VOLTAGE: 220V-240V 60/60HZ INPUT CURRENT:1.25A power on off voltage select 115 2.5A 250V 100V-120V 1.25A 250V 220V-240V CAUTION: TO REDUCE RISK OF FIRE REPLACE FUSE AS MARKED Right 5