Creative SB0400 User Guide - Page 20
Installation Steps, Step 1: Prepare your computer, Step 1: Prepare your, computer
View all Creative SB0400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Installation Steps Step 1: Prepare your computer Turn off the main power supply and disconnect your computer's power cord. Systems using an ATX power supply unit with soft power off may still be powering the PCI slot. This can damage your audio card when it is inserted into the slot. 1. Turn off your computer and all peripheral devices. 2. Touch a metal plate on your computer to ground yourself and to discharge any static electricity, and then unplug the power cord from the wall outlet. 3. Remove the computer cover. 4. Remove the metal brackets from two adjacent unused PCI slots as shown in Figure 1-3. If the brackets were mounted with screws, put the screws aside for later use in Steps 2 and 3 below. A Remove any existing audio card or disable the onboard audio chipset. For more information, see "Problems with Multiple Audio Devices" on page B-9. A: metal bracket B: PCI slot C: ISA slot (may not be present on your computer) Figure 1-3: Removing metal plates B C Installing Hardware 1-6