Cub Cadet CSV 070 Operation Manual - Page 2

SAFE OPERATION PRACTICES WARNING This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol - HEED ITS WARNING! DANGER This machine was built to be operated according to the safe operation practices in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This machine is capable of amputating fingers, hands, toes and feet and throwing debris. Failure to observe the following safety instructions could result in serious injury or death. Training Operation 1. Read, understand and follow all instructions on the machine and in the manual(s) before 1. Do not put hands and feet near rotating parts or in the feeding chambers and discharge attempting to assemble and operate. Keep this manual in a safe place for future and regular opening. Contact with the rotating impeller can amputate fingers, hands and feet. reference and for ordering replacement parts. 2. Before starting the machine, make sure the chipper chute, feed intake (nozzle) and cutting 2. Be familiar with all controls and their proper operation. Know how to stop the machine and chamber are empty and free of all debris. disengage them quickly. 3. Thoroughly inspect all material to be shredded and remove any metal, rocks, bottles, cans or 3. Never allow children under 16 years of age to operate this machine. Children 16 and over other foreign objects which could cause personal injury or damage to the machine. should read and understand the instructions and safe operation practices in this manual and on the machine and be trained and supervised by an adult. 4. If the impeller strikes a foreign object or if your machine should start making an unusual noise or vibration, immediately shut the engine off. Allow the impeller to come to a 4. Never allow adults to operate this machine without proper instruction. complete stop. Disconnect the spark plug wire, ground it against the engine and perform the 5. Keep bystanders, pets and children at least 75 feet from the machine while it is in operation. following steps: Stop machine if anyone enters the area. a. Inspect for damage. 6. Keep in mind that the operator or user is responsible for accidents or hazards occurring to b. Repair or replace any damaged parts. other people, their property and themselves. c. Check for any loose parts and tighten to assure continued safe operation. Preparation 5. Do not allow an accumulation of processed material to build up in the discharge area. This 1. Thoroughly inspect the area where the equipment is to be used. Remove all rocks, bottles, can prevent proper discharge and result in kickback of material through the feed opening. cans or other foreign objects which could be picked up or thrown and cause personal injury 6. Do not attempt to shred or chip material larger than specified on the machine or in this or damage to the machine. manual. Personal injury or machine damage could result. 2. Always wear safety glasses or safety goggles during operation and while performing an 7. Never attempt to unclog either the feed intake or discharge opening while the engine is adjustment or repair, to protect your eyes. Thrown objects which ricochet can cause serious running. Shut the engine off, wait until all moving parts have stopped, disconnect the spark injury to the eyes. plug wire and ground it against the engine before clearing debris. 3. Wear sturdy, rough-soled work shoes and close-fitting slacks and shirts. Loose fitting 8. Never operate without the chipper chute, vacuum bag, inlet nozzle or optional hose clothes or jewelry can be caught in movable parts. Never operate this machine in bare feet or attachment (if applicable) properly attached to the machine. Never attempt to attach or sandals. Wear leather work gloves when feeding material in the chipper chute. change either attachment while the engine is running. Never empty or change vacuum bag 4. Before starting, check all bolts and screws for proper tightness to be sure the machine is in while the engine is running. Vacuum bag must be kept closed at all times during operation. safe working condition. Also, visually inspect machine for any damage at frequent intervals. 9. Do not change the engine governor settings or overspeed the engine. The governor controls 5. Maintain or replace safety and instructions labels, as necessary. the maximum safe operating speed of the engine. 6. Never attempt to make any adjustments while the engine is running, except where specifically recommended by the manufacturer. 10. Keep your face and body back and to the side of the chipper chute while feeding material into the machine to avoid accidental kickback injuries. Safe Handling of Gasoline: To avoid personal injury or property damage use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Serious personal injury can occur when gasoline is spilled on yourself or your clothes which can ignite. Wash your skin and change clothes immediately. 1. Use only an approved gasoline container. 2. Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place containers on the ground away from your vehicle before filling. 3. When practical, remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment on a trailer with a portable container, rather than from a gasoline dispenser nozzle. 4. Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock-open device. 11. Never operate this machine without good visibility or light. 12. Do not operate this machine on a paved, gravel or non-level surface. 13. Do not operate this machine while under the influence of alcohol or drugs. 14. Muffler and engine become hot and can cause a burn. Do not touch. 15. Never pick up or carry machine while the engine is running. 16. If situations occur which are not covered in this manual, use care and good judgement. Contact Customer Support for assistance and the name of the nearest service dealer. 17. Never run an engine indoors or in a poorly ventilated area. Engine exhaust contains carbon monoxide, an odorless and deadly gas. 18. Never attempt to unclog either the feed intake or discharge opening, remove or empty bag, or inspect and repair the machine while the engine is running. Shut the engine off and wait until all moving parts have come to a complete stop. Disconnect the spark plug wire and ground it against the engine. 5. Extinguish all cigarettes, cigars, pipes and other sources of ignition. 19. If the machine should start to vibrate abnormally, stop the engine and check immediately for 6. Never fuel machine indoors. the cause. Vibration is generally a warning sign of trouble. 7. Never remove gas cap or add fuel while the engine is hot or running. Allow engine to cool at 20. Stop the engine when leaving the operating position, and when making any repairs, least two minutes before refueling. adjustments and inspections. 8. Never over fill fuel tank. Fill tank to no more than ½ inch below bottom of filler neck to allow 21. Take all possible precautions as recommended by the manufacturer when leaving the space for fuel expansion. machine unattended. Disengage power take-off, shift into neutral, stop the engine and remove the key. 9. Replace all fuel tank and container caps securely. 10. If gasoline is spilled, wipe it off the engine and equipment. Move unit to another area. Wait 5 22. Do not operate the engine in a confined space where dangerous carbon monoxide fumes can collect. minutes before starting the engine. 11. To reduce fire hazards, keep machine free of grass, leaves, or other debris build-up. Clean up 23. Never operate the machine at high transport speeds on hard or slippery surfaces. oil or fuel spillage and remove any fuel soaked debris. 24. Use extreme caution when reversing or pulling the machine towards you. 12. Never store the machine or fuel container inside where there is an open flame, spark or pilot light as on a water heater, space heater, furnace, clothes dryer or other gas appliances. 2