Cub Cadet LGT 1054 LGT 1050 Operator's Manual - Page 18
Engaging the PTO, Mowing - deck
View all Cub Cadet LGT 1054 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Engaging the PTO Engaging the PTO transfers power to the cutting deck or other (separately available) attachments. To engage the PTO: 1. Move the throttle control lever to the FAST (rabbit) position. NOTE: When operating the tractor, be certain that the throttle/choke control is always in the FAST (rabbit) position. Operating with the throttle at less than full throttle may lead to shortened battery life, and poor cut quality. 2. Pull the PTO/Blade Engage knob outward into the engaged (ON) position. See Figure 5-3. ON OFF Figure 5-3 Mowing WARNING! To help avoid blade contact or a thrown object injury, keep bystanders, helpers, children and pets at least 75 feet from the machine while it is in operation. Stop the machine if anyone enters the area. The following information will be helpful when using the cutting deck with your tractor. WARNING! Plan your mowing pattern to avoid discharge of materials toward roads, sidewalks, bystanders and the like. Also, avoid discharging material against a wall or obstruction which may cause discharged material to ricochet back toward the operator. • Do not mow at high ground speed, especially if a mulch kit or grass collector is installed. • Do not cut the grass too short. Short grass is prone to weed growth and yellows quickly in dry weather. • Always operate the tractor with the throttle lever in the FAST (rabbit) position while mowing. IMPORTANT: It is important to always operate the tractor with the throttle in the FAST (rabbit) position to ensure proper charge on the battery. • For best results it is recommended that the first two laps be cut with the discharge thrown towards the center. After the first two laps, reverse the direction to throw the discharge to the outside for the balance of cutting. This will give a better appearance to the lawn. • Do NOT attempt to mow heavy brush and weeds or extremely tall grass. Your tractor is designed to mow lawns, NOT clear brush. • Keep the blades sharp and replace the blades when worn. 18 Section 5 - Operation