Cuisinart BJC-550 User Manual - Page 8
Compact Blender, Troubleshooting, Compact Juice Extractor
View all Cuisinart BJC-550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
COMPACT BLENDER TROUBLESHOOTING Problem: Solution: My blender is not turning on Be sure the blade assembly is on the blending cup correctly and locked into place Plug the blender into an independent and electrical outlet and make sure the blender is securely plugged in. If it still doesn't work, try plugging into a different outlet and/or check your home's circuit breaker. The blender stops running The motor could have overheated. The resettable fuse, which protects the motor if overloaded, may have been tripped. When this happens, reset the appliance by unplugging it and letting it cool for a minimum of 15 minutes. Then, reduce the contents of the blending cup and/or clear any jams. Restart the unit as noted in the operating directions. The blade assembly is hard to remove after blending The ingredients cause pressure, and with the airtight seal, pressure builds up creating a vacuum or a suction effect. This is normal. Unit appears to be leaking Check rubber gasket and make sure it's flush with the blender assembly. You can also check the rubber gasket to see if is in place or even damaged. The blade assembly should be tight. COMPACT JUICE EXTRACTOR TROUBLESHOOTING Problem: Solution: Juice extractor does not turn on Check to see if the locking clamps are properly engaged. (See Assembly Instructions, page 6.) Turn to HIGH to start juicing. The juice extractor stops running The motor could have overheated. The resettable fuse, which protects the motor if overloaded, may have been tripped. When this happens, reset the appliance by unplugging it and letting it cool for a minimum of 15 minutes. Then, reduce the contents or clear any jams. Restart the unit as noted in the operating directions. Juice flow is slow Excess pulp in mesh filter basket can slow juice rate. Stop the juice extractor and clean filter basket. Difficulty getting herbs or leafy greens down the feed tube Place herbs between other ingredients. When using leafy greens, always place the leafy side in first and do not over pack the feed tube. Unit is on but juice/pulp not flowing Make sure the mesh filter basket/blade is in place. 8