CyberPower PR1000RT2UC User Manual - Page 12

LCD OPERATION GUIDE (continued) Menu / Basic Setup In order to better supply power to the connected equipment, it is recommended to check settings in this menu before you start using your UPS. Item Utility Quality Sensitivity Extended Battery Module Quantity* *Select models Default Normal Medium 0 Option  Good  Normal  Poor  (Customized)  High  Medium  Low  0-10  Auto-sensing Description Select the voltage quality of the input utility power. If Good is selected, the UPS will be more sensitive to power quality and go to battery mode more often to supply the cleanest power to connected devices. If Poor is selected, the UPS will tolerate more power fluctuations and go to battery mode less often. "Customized" shows up when Maximum/Minimum Output Voltage has been adjusted in Advanced Setup Menu or through software. Select the sensitivity level to power events for connected equipment. If the connected equipment is highly sensitive to power events, select High; the UPS will go to battery mode more often to provide the cleanest power. If the connected equipment can tolerate more power events, select Low; the UPS will go to battery mode less often. If Auto-sensing is selected, the UPS will change the numbers automatically. Menu / Ambient Setup The settings in this menu affect the UPS display, alarm, and noise. Customize your UPS to meet your needs. Item Eco Mode LED Brightness LCD Hibernation Cycling Display Default Active Dim After 1 minute Never Option Description  Active  Inactive When Active is selected, the UPS will change related setup functions in this menu automatically to work under low energy consumption.  Active (Customized) You can also set the functions in this menu independently and then go back to Eco Mode to  Inactive have a check. If Active is displayed, the UPS works (Customized) under low energy consumption.  Bright  Normal  Dim  Only Power On The LED brightness can be set in accordance with the ambient lights or different usage scenario. If Only Power On is selected, all LED indicators will be off except Power On Indicator.  Never  After 1 minute  After 5 minutes  After 10 minutes After this amount of time with no activity, the display screen will shut off to save energy.  Never  After 10 seconds  After 20 seconds  After 30 seconds After this amount of time with no activity, UPS will start cycling the status information on display screen. 11