CyberPower PR1000RT2UC User Manual - Page 15

LCD OPERATION GUIDE (continued) Item Battery Change Date Schedule Test - On Startup Schedule Test - Frequency Date and Time Power Meter Reset IP Access IP Address Default ---/---- No Never No DHCP Auto-sensing Option  Month/Year  Yes  No  Never  Every 1 week  Every 2 weeks  Every 3 weeks  Every 4 weeks  Year/Month/Day Hour:Minute  Yes  No  DHCP  Manual IP Setup  Auto-sensing  Manual Key-in Subnet Mask Auto-sensing  Auto-sensing  Manual Key-in Gateway Firmware Update* *Only displayed in Standby Mode Back to Default Auto-sensing No No  Auto-sensing  Manual Key-in  Yes  No  Yes  No Description Optional setup information for users to record the installation date of battery pack. Reset the data when replacing new battery pack. If Yes is selected, the UPS will perform a Self Test every time on startup. Select the amount of time that the UPS will perform Self Test periodically after startup. Set the Date and Time for use in data/event logs. Select Yes to reset the value of Load Energy in Status Menu. Select the way to access the IP/Subnet Mask/Gateway. This shows "No Web Device" when no RMCARD is installed. Change the IP Access setting to manual IP Setup and then this item can be adjusted manually. This shows "No Web Device" when no RMCARD is installed. Change the IP Access setting to manual IP Setup and then this item can be adjusted manually. This shows "No Web Device" when no RMCARD is installed. Change the IP Access setting to manual IP Setup and then this item can be adjusted manually. This shows "No Web Device" when no RMCARD is installed. Select Yes to update the firmware of UPS in Standby Mode. Select Yes to restore the UPS factory default settings. 14