D-Link DAP-1820 User Manual - Page 19
Wireless Setup Wizard - ac2000
View all D-Link DAP-1820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Section 3 - Configuration Wireless Setup Wizard The setup wizard is designed to guide you through a step-by-step process to configure your new DAP-1820 AC2000 Wi-Fi Range Extender to extend your wireless network and connect to the Internet via a wireless setup process. To set your DAP-1820 using an Ethernet cable, please refer to "Access Point Mode Settings" on page 23. To access the setup utility for the DAP-1820 AC2000 Wi-Fi Range Extender on your PC, first connect to the DAP-1820 wirelessly using the Wi-Fi name (SSID) and password located on the back of your DAP-1820. Then open a web browser and enter http://dlinkap.local./ in your browser's URL field. You may also enter the IP address* of the DAP-1820. * The default IP address is 192.168.0.50. Once your DAP-1820 connects to the host network, it will be assigned a new IP address based on your network's DHCP settings. You will need to log in to your router to see what IP address is assigned to your DAP-1820. For multiple DAP-1820s, go to http://dlinkapxxxx.local. as shown on the included Quick Installation Card, with "xxxx" being the last four digits of the DAP-1820's MAC address. If this is your first time logging in to the extender and no connection has been established, the setup wizard will automatically appear. If the setup process was not previously completed, then log in to the interface by leaving the password field blank. D-Link DAP-1820 User Manual 16