D-Link DAP-1820 User Manual - Page 36
Autoconfiguration SLAAC/DHCPv6, Static IPv6, Local Connectivity Only, Use the following, DNS address
View all D-Link DAP-1820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Section 3 - Configuration IPv6 - Autoconfiguration (SLAAC/DHCPv6) My Internet Connection Select Autoconfiguration (SLAAC/DHCPv6) to have the is DAP-1820 automatically receive an IPv6 address from the uplink router. Obtain a DNS server address automatically You can select to obtain IPv6 DNS server information automatically, or you can select to configure DNS servers manually by selecting next to the option Use the following DNS address. Primary DNS Server For manual settings, enter the primary IPv6 DNS server address. Secondary DNS Server For manual settings, enter the secondary IPv6 DNS server address. This is optional but will provide backup if the primary server fails. My Internet Connection is IPv6 - Static IPv6 Select Static IPv6 to manually assign an IP address to the DAP-1820. IPv6 Address Enter the IPv6 address that you want to assign to the extended network AP. This address should be outside of the uplink router's DHCP address pool. Subnet Prefix Length Enter the length of the IPv6 subnet prefix. Default Gateway Enter the default gateway. Primary DNS Server Enter the primary IPv6 DNS server address. Secondary DNS Server Enter the secondary IPv6 DNS server address. This is optional but will provide backup if the primary server fails. IPv6 - Local Connectivity Only My Internet Connection Select Local Connectivity Only to set an IPv6 address only is for the local network. LAN IPv6 Link-Local The link-local address of the DAP-1820. Address D-Link DAP-1820 User Manual 33