D-Link DCS-6004L User Manual - Page 24
Enable UPnP, Presentation, Port Forwarding, Enable PPPoE, User Name, Password, Access Name
View all D-Link DCS-6004L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Section 4: Configuration Enable UPnP Enabling this setting allows your camera to be Presentation: configured as a UPnP device on your network. Enable UPnP Enabling this setting allows the camera to add port Port Forwarding: forwarding entries into the router automatically on a UPnP capable network. Enable PPPoE: Enable this setting if your network uses PPPoE. User Name / Enter the username and password for your PPPoE Password: account. Re-enter your password in the Confirm Password field. You may obtain this information from your ISP. HTTP Port: The default port number is 80. Access Name for The default name is video#.mjpg, where # is the Stream 1~3: number of the stream. HTTPS Port: You may use a PC with a secure browser to connect to the HTTPS port of the camera. The default port number is 443. RTSP Port: The port number that you use for RTSP streaming to mobile devices, such as mobile phones or PDAs. The default port number is 554. You may specify the address of a particular stream. For instance, live1.sdp can be accessed at rtsp://x.x.x.x/video1. sdp where the x.x.x.x represents the ip address of your camera. Enable CoS: Enabling the Class of Service setting implements a best-effort policy without making any bandwidth reservations. D-Link DCS-6004L/DCS-6005L User Manual 24