D-Link DCS-6510 User Manual - Page 15

Pendant Mount DCS-33-3

Get D-Link DCS-6510 PDF manuals and user guides
UPC - 790069340055
View all D-Link DCS-6510 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

Installation Pendant Mount (DCS-33-3) 1. Locate a suitable position on the ceiling for a 34 mm (+2 / -0 mm) hole to be cut. A template is included to aid in marking the mounting hole. 2. Cut the hole in the ceiling according to the template 3. Drill 4 separate 6 mm holes corresponding to the holes in the mounting template and insert the plastic anchors into these holes. 4. Place the rubber seal between the pendant bracket and the ceiling to ensure a waterproof seal between the ceiling and the bracket. 5. Attach the pendant bracket to the ceiling using the screws provided. Pendant Bracket Bracket Cap 6. Attach the bracket cap to the bottom of the pendant bracket, rotating the cap counter-clockwise to tighten it into place. 7. Insert the screw into the base of the pendant bracket at the top of the bracket cap to secure the bracket cap into place. 8. Attach one side of the safety tether cable to the bracket cap using the small screw. Attach the opposite side of the tether to the base of the camera using the other small screw. D-Link DCS-6510 User Manual Tether Dome Camera 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
15
D-Link DCS-6510 User Manual
Installation
Pendant Mount (DCS-33-3)
1.
Locate a suitable position on the ceiling for a 34 mm (+2 /
–
0 mm) hole to be cut. A
template is included to aid in marking the mounting hole.
2.
Cut the hole in the ceiling according to the template
3.
Drill 4 separate 6 mm holes corresponding to the holes in the mounting template and
insert the plastic anchors into these holes.
4.
Place the rubber seal between the pendant bracket and the ceiling to ensure a
waterproof seal between the ceiling and the bracket.
5.
Attach the pendant bracket to the ceiling using the screws provided.
6.
Attach the bracket cap to the bottom of the pendant bracket, rotating the cap
counter-clockwise to tighten it into place.
7.
Insert the screw into the base of the pendant bracket at the top of the bracket cap to
secure the bracket cap into place.
8.
Attach one side of the safety tether cable to the bracket cap using the small screw.
Attach the opposite side of the tether to the base of the camera using the other small
screw.
Pendant
Bracket
Bracket
Cap
Tether
Dome
Camera