D-Link DCS-6510 User Manual - Page 17

Bent Mount DCS-33-4

Get D-Link DCS-6510 PDF manuals and user guides
UPC - 790069340055
View all D-Link DCS-6510 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

Installation Bent Mount (DCS-33-4) 1. Locate a suitable position on the wall for a 34 mm (+2 / -0 mm) hole to be cut. A template is included to aid in marking the mounting hole. 2. Cut the hole in the wall according to the template 3. Drill 4 separate 6 mm holes corresponding to the holes in the mounting template and insert the plastic anchors into these holes. 4. Place the rubber seal between the bent bracket and the wall to ensure a waterproof seal between the wall and the bracket. 5. Attach the bent bracket to the wall using the screws provided. 6. Place the rubber washer into the hole at the top of the bracket cap to ensure a waterproof seal between the cap and the bracket. 7. Attach the bracket cap to the bottom of the bent bracket, rotating the cap counterclockwise to tighten it into place. 8. Insert the screw into the base of the bent bracket at the top of the bracket cap to secure the bracket cap into place. Bent Bracket Bracket Cap D-Link DCS-6510 User Manual 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
17
D-Link DCS-6510 User Manual
Installation
Bent Mount (DCS-33-4)
1.
Locate a suitable position on the wall for a 34 mm (+2 /
–
0 mm) hole to be cut. A
template is included to aid in marking the mounting hole.
2.
Cut the hole in the wall according to the template
3.
Drill 4 separate 6 mm holes corresponding to the holes in the mounting template and
insert the plastic anchors into these holes.
4.
Place the rubber seal between the bent bracket and the wall to ensure a waterproof
seal between the wall and the bracket.
5.
Attach the bent bracket to the wall using the screws provided.
6.
Place the rubber washer into the hole at the top of the bracket cap to ensure a
waterproof seal between the cap and the bracket.
7.
Attach the bracket cap to the bottom of the bent bracket, rotating the cap counter-
clockwise to tighten it into place.
8.
Insert the screw into the base of the bent bracket at the top of the bracket cap to
secure the bracket cap into place.
Bracket
Cap
Bent
Bracket