D-Link DGS-1016TG User Guide - Page 10

D-Link DGS-1016T Unmanaged Gigabit Ethernet Switch • A packet buffer size of 272 Kbytes • Auto-negotiation (NWay) between 10/100/1000 Mbps, half-duplex or full duplex and flow control for 10/100/1000BASE-T ports. • Gigabit ports support connection bypass mode Ports • Sixteen high-performance NWay Ethernet ports, all of which operate at 10/100/1000 Mbps for connections to end stations, servers and hubs. All ports can auto-negotiate between 10Mbps, 100Mbps and 1000Mbps at full or half duplex. • Two Gigabit Ethernet Combo ports for making 1000BASE-T and Mini GBIC connections Front-Panel Components The front panel of the Switch consists of LED indicators, 16 (10/100/1000 Mbps) Ethernet ports and 2 Mini GBIC Combo ports. Figure 1 - 1. Front Panel View of the switch as shipped Comprehensive LED indicators display the status of the switch and the network. Two 1000BASE-T Mini GBIC Combo ports for connections to server or network backbone LED Indicators The LED indicators of the Switch include Power, 1000M and Link/Act. The following shows the LED indicators for the Switch along with an explanation of each indicator. Figure 1-2. LED Indicators Power 1000M Link/Act This indicator on the front panel should be lit during the Power-On Self Test (POST). It will light green approximately 2 seconds after the switch is powered on to indicate the ready state of the device. This indicator on the front panel will light solid green for a port transferring at 1000Mbps. If this LED is dark, the port will be transferring at 10/100Mbps Each on-board Gigabit Ethernet port has a corresponding indicator. This will light steady green for a valid link and blink whenever there is reception or transmission (i.e. Activity--Act) of data occurring at a port. 10