D-Link DGS-1100 User Manual 1.00 WW - Page 25

4 Configuration D-Link Smart Managed Switch User Manual Warmstart Check this feature to have client devices send an SNMP notification to the management station when performing a warm start. Table 4.8 Click Apply to make the configurations take effect. Management > SNMP > SNMP Community Table Settings This SNMP Community Table Settings page is used to create an SNMP community string to define the relationship between the SNMP manager and an agent. The community string acts like a password to permit access to the agent on the Switch. Figure 4.22 -Management > SNMP > SNMP Community Table Settings The fields that can be configured for SNMP Community Settings are described below: Item Description Access Right Select the access right here. Options to choose from are Read Only, and Read Write. Read Only - SNMP community members can only read the contents of the MIBs on the Switch. Read Write - SNMP community members can read from, and write to the contents of the MIBs on the Switch. Community Name Enter an alphanumeric string of up to 16 characters that is used to identify members of an SNMP community. This string is used like a password to give remote SNMP managers access to MIB objects in the Switch's SNMP agent. Table 4.9 Click Apply to create a new SNMP community. Management > SNMP > SNMP Host Settings This SNMP Host Settings page is used to configure the recipients of the SNMP notifications. Figure 4.23 - Management > SNMP > SNMP Host Settings The fields that can be configured for SNMP Host Settings are described below: Item Description Host IPv4 Address Specify the IPv4 address of the SNMP management host. User-based Security Specify the security model. The options to choose from are Model SNMPv1 and SNMPv2c. 22