D-Link DGS-1100 User Manual 1.00 WW - Page 42
Green > EEE
![]() |
View all D-Link DGS-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
4 Configuration D-Link Smart Managed Switch User Manual Figure 4.52 - Monitoring > Mirroring Settings The fields that can be configured for Mirroring Settings are described below: Item Description Mirroring Settings Destination Frame Type Specify to enable or disable the mirroring function of the Switch. Specify the destination where the data will be mirrored too. This cannot be any of the designated source ports from the data will be mirrored. Specify the frame type for mirroring: Rx: Duplicates the data that is received on the source port(s) and forwards it to the Target Port. Click "all" to include all ports into port mirroring. Tx: Duplicates the data transmitted from the source port and forwards it to the Target Port. Click "all" to include all ports into port mirroring. Both: Duplicate both the data transmitted from and data sent to the source port(s), and forwards all the data to the assigned Target Port. Source Select the range of ports to be the source port and Frame Type to be mirrored. Table 4.34 Click Apply to add the newly configured mirror entry based on the information entered. Green > EEE The Energy Efficient Ethernet (EEE) is defined in IEEE 802.3az. It is designed to reduce the energy consumption of an inactive link by putting it in a sleep mode. Figure 4.53 - Green > EEE The fields that can be configured for Energy Efficient Ethernet are described below: Item Description 802.3az EEE Specify to enable or disable the EEE function of the Switch. Table 4.35 Click Apply to make the configurations take effect. 39
![](/manual_guide/products/dlink-dgs110005v2-user-manual-100-ww-1335cb3/42.png)