D-Link DGS-3620-52T CLI Guide - Page 457
Internet Group, Management Protocol, IGMP Commands
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 457 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Chapter 37 Internet Group Management Protocol (IGMP) Commands config igmp [ipif | all] {version | query_interval | max_response_time | robustness_variable | last_member_query_interval | state [enable | disable]} (1) show igmp {ipif } show igmp group {group | ipif } config igmp check_subscriber_source_network [ipif | all] [enable | disable] show igmp check_subscriber_source_network {ipif } create igmp static_group ipif group delete igmp static_group ipif [group | all] show igmp static_group {ipif } 37-1 config igmp Description This command is used to configure IGMP on the Switch. Format config igmp [ipif | all] {version | query_interval | max_response_time | robustness_variable | last_member_query_interval | state [enable | disable]} (1) Parameters ipif - Specifies the IP interface name used for this configuration. - Enter the IP interface name used for this configuration here. This name can be up to 12 characters long. all - Specifies that all the IP interfaces will be used. version - (Optional) Specifies the IGMP version used. - Enter the IGMP version number used here. This value must be between 1 and 3. The default value is 3. query_interval - (Optional) Specifies the time in seconds between general query transmissions. - Enter the query interval time here. This value must be between 1 and 31744 seconds. The default value is 125. max_response_time - (Optional) Specifies the maximum time in seconds to wait for reports from members. - Enter the maximum response time here. This value must be between 1 and 25 seconds. The default value is 10. robustness_variable - (Optional) Specifies the permitted packet loss that guarantees IGMP. - Enter the robustness variable here. This value must be between 1 and 7. The default value is 2. last_member_query_interval - (Optional) Specifies the maximum Response Time inserted into the Group-Specific Queries that are sent in response to Leave Group messages, which is also the amount of time between Group-Specific Query messages. 452