D-Link DGS-3620-52T CLI Guide - Page 504
config ip standard access_list
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 504 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Parameters - Enter the name of the access list used here. This name can be up to 16 characters long. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To create an access list named "List1": DGS-3620-28SC:admin# create ip standard access_list List1 Command: create ip standard access_list List1 Success. DGS-3620-28SC:admin# 42-6 config ip standard access_list Description This command is used to configure an access list to add or delete an entry. Format config ip standard access_list [add | delete] [deny | permit] Parameters - Enter the name of the access list used here. This name can be up to 16 characters long. add - Specifies to add a network address in the access list. delete - Specifies to delete a network address from the access list. - Specifies the network address that will work as the filter condition for the access list. deny - Specifies that the network matched will be denied. permit - Specifies that the network matched will be permitted. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example This example configures access list "List1" to add one entry: 499