D-Link DGS-3620-52T CLI Guide - Page 976
config stp mst_config_id, enable stp
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 976 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Success. DGS-3620-28SC:admin# 90-8 config stp mst_config_id Description This command is used to configure a configuration name or revision level in the MST configuration identification. The default configuration name is the MAC address of the bridge. Format config stp mst_config_id {revision_level | name } (1) Parameters revision_level - Specify the revision level. - Specify the revision level. name - Specify the name given for a specified MST region. - Specify the name given for a specified MST region. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To change the name and revision level of the MST configuration identification: DGS-3620-28SC:admin#config stp mst_config_id revision_level 1 name R&D_BlockG Commands: config stp mst_config_id revision_level 1 name R&D_BlockG Success. DGS-3620-28SC:admin# 90-9 enable stp Description Although it is possible to modify to allow a user to enable STP per instance, CIST should be enabled first before enabling other instances. When a user enables the CIST, all MSTIs will be enabled automatically if FORCE_VERSION is set to MSTP and there is at least one VLAN mapped to this instance. Format enable stp 971