D-Link DGS-3620-52T CLI Guide - Page 814
config pim last_hop_spt_switchover, show pim ipmroute
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 814 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 73-12 config pim last_hop_spt_switchover Description This command is used by the last hop router to decide whether to receive the multicast data from the shared tree or switch over to the shortest path tree. When the switchover mode is set to be never, the last hop router will always receive the multicast data from the shared tree. When the mode is set to immediately, the last hop router will always receive the multicast data from the shortest path tree. Format config pim last_hop_spt_switchover [never | immediately] Parameters never - Specifies that the router will always receive multicast data from the shared tree. immediately - Specifies that the router will always receive multicast data from shortest path tree. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example Set the SPT-switchover mode to never: DGS-3620-28SC:admin# config pim last_hop_spt_switchover never Command: config pim last_hop_spt_switchover never Success. DGS-3620-28SC:admin# 73-13 show pim ipmroute Description This command is used to list all the entries of multicast routing, includes (*,G), (S,G) and (S,G,rpt). Format show pim ipmroute Parameters None. Restrictions None. 809