D-Link DGS-3630-28SC User Manual - Page 132
Firmware Upgrade from SFTP, Firmware Backup to HTTP
![]() |
View all D-Link DGS-3630-28SC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter RCP Server IP User Name Source File Destination File Description Enter the RCP server IP address here. Enter the user name used for the RCP connection here. This name can be up to 32 characters long. Enter the source filename and path of the firmware file located on the RCP server here. This field can be up to 64 characters long. Enter the destination path and location where the new firmware should be stored on the Switch. This field can be up to 64 characters long. Click the Upgrade button to initiate the firmware upgrade. Firmware Upgrade from SFTP This window is used to initiate a firmware upgrade from an SFTP server. To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Upgrade from SFTP, as shown below: Figure 11-6 Firmware Upgrade from SFTP Window The fields that can be configured are described below: Parameter SFTP Server IP User Name Password Source File Destination File Description Enter the IPv4 address of the SFTP server here. Enter the user name used for the SFTP connection here. This name can be up to 32 characters long. Enter the password used for the SFTP connection here. This password can be up to 15 characters long. Enter the source filename and path of the firmware file located on the SFTP server here. This field can be up to 64 characters long. Enter the destination path and location where the new firmware should be stored on the Switch. This field can be up to 64 characters long. Click the Upgrade button to initiate the firmware upgrade. Firmware Backup to HTTP This window is used to initiate a firmware backup to a local PC using HTTP. 125
![](/manual_guide/products/dlink-dgs3630-user-manual-7703634/132.png)