D-Link DGS-3630-28SC User Manual - Page 17
Port Status, Master, Slave, 1000M Master, 1000M Slave, Capability Advertised, Speed, Apply
View all D-Link DGS-3630-28SC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description The Master setting will allow the port to advertise capabilities related to duplex, speed and physical layer type. The master setting will also determine the master and slave relationship between the two connected physical layers. This relationship is necessary for establishing the timing control between the two physical layers. The timing control is set on a master physical layer by a local source. The Slave setting uses loop timing, where the timing comes from a data stream received from the master. If one connection is set for master, the other side of the connection must be set for slave. Any other configuration will result in a 'link down' status for both ports. Options to choose from are: • Auto - Specifies that for copper ports, auto-negotiation will start to negotiate the speed and flow control with its link partner. For fiber ports, auto-negotiation will start to negotiate the clock and flow control with its link partner. • 10M - Specifies to force the port speed to 10 Mbps. This option is only available for 10 Mbps copper connections. • 100M - Specifies to force the port speed to 100 Mbps. This option is only available for 100 Mbps copper connections. • 1000M - Specifies to force the port speed to 1 Gbps. This option is only available for 1 Gbps fiber connections. • 1000M Master - Specifies to force the port speed to 1 Gbps and operates as the master, to facilitate the timing of transmit and receive operations. This option is only available for 1 Gbps copper connections. • 1000M Slave - Specifies to force the port speed to 1 Gbps and operates as the slave, to facilitate the timing of transmit and receive operations. This option is only available for 1 Gbps copper connections. • 10G - Specifies to force the port speed to 10 Gbps. This option is only available for 10 Gbps fiber connections. • 10G Master - Specifies to force the port speed to 10 Gbps and operates as the master, to facilitate the timing of transmit and receive operations. This option is only available for 10 Gbps copper connections. • 10G Slave - Specifies to force the port speed to 10 Gbps and operates as the slave, to facilitate the timing of transmit and receive operations. This option is only available for 10 Gbps copper connections. Capability Advertised When the Speed is set to Auto, these capabilities are advertised during autonegotiation. Click the Apply button to accept the changes made. Port Status This window is used to view the Switch's physical port status and settings. 10