D-Link DGS-3630-28SC User Manual - Page 60
MAC Address Table Settings, L2 Features > FDB > Static FDB > Multicast Static FDB
View all D-Link DGS-3630-28SC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click L2 Features > FDB > Static FDB > Multicast Static FDB, as shown below: Figure 5-2 Multicast Static FDB Window The fields that can be configured are described below: Parameter From Port - To Port VID MAC Address Description Select the range of ports that will be used for this configuration here. Enter the VLAN ID of the VLAN the corresponding MAC address belongs to. Enter the static destination MAC address of the multicast packets. This must be a multicast MAC address. The format of the destination MAC address is 01-XXXX-XX-XX-XX. Click the Apply button to accept the changes made. Click the Delete All button to remove all the entries. Click the Delete button to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. MAC Address Table Settings This window is used to display and configure the global MAC address table settings. To view the following window, click L2 Features > FDB > MAC Address Table Settings, as shown below: Figure 5-3 MAC Address Table Settings (Global Settings) Window The fields that can be configured are described below: Parameter Aging Time Aging Destination Hit Description Enter the MAC address table aging time here. This value must be between 10 and 1000000 seconds. Entering 0 will disable MAC address aging. By default, this value is 300 seconds. Select to enable or disable the aging destination hit function. Click the Apply button to accept the changes made. 53