D-Link DGS-3630-52PC User Manual - Page 182
L3 Unicast Group Entry Type, L2 Multicast Group Entry Bucket Actions
View all D-Link DGS-3630-52PC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
Field Chain ID Kind DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Bits 16 to 27 28 to 31 Description The chain ID is used to reference to Layer 2 interface group entries. The range is from 1 to 4094. 3 (L2 Multicast). L2 Multicast Group Entry Bucket Actions Field Group Description This must chain to a Layer 2 interface group entry whose chain ID name component matches the chain ID component of this group entry's name. L2 Multicast Group Entry Counters Field Reference Count (Flow Entries) Duration (Seconds) Description The number of flow entries or group entries are currently referencing this group entry. The time, in seconds, since this group entry was installed. L3 Unicast Group Entry Type Field Group Identifier Group Type Counters Action Buckets Description A 32-bit unsigned integer, uniquely identifying the group on the OpenFlow switch. The naming rule is shown in the L3 Unicast Group Entry Naming Conversion table. Indirect. Specifies per-group entry counters. Supports a single action bucket. L3 Unicast Group Entry Naming Conversion Field ID Bits 0 to 27 Kind 28 to 31 Description This is the index to differentiate between group entries of this type. 2 (L3 Unicast). L3 Unicast Group Entry Bucket Actions Field Group Decrement TTL Set-Field Description This required field must be chained to a Layer 2 interface group entry. The decremented TTL. Note: The check for invalid TTLs is not supported. This required field sets the ETH_DST, ETH_SRC, and VLAN_ID fields. 175