D-Link DGS-3630-52PC User Manual - Page 96
RADIUS, RADIUS Global Settings
![]() |
View all D-Link DGS-3630-52PC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Level List Name Method 1 ~ Method 4 Description Select the privilege level used here. Options to choose from are levels 1 to 15. Enter the method list name that will be used with the AAA accounting commands option here. Select the method lists that will be used for this configuration here. Options to choose from are none, group, and tacacs+. The none option is only available for Method 1. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. RADIUS RADIUS Global Settings This window is used to display and configure the global RADIUS settings. To view the following window, click Security > RADIUS > RADIUS Global Settings, as shown below: Figure 7-12 RADIUS Global Settings Window The fields that can be configured in RADIUS Global Settings are described below: Parameter DeadTime Description Enter the dead time value here. This value must be between 0 and 1440 minutes. By default, this value is 0 minutes. When this option is 0, the unresponsive server will not be marked as dead. This setting can be used to improve the authentication processing time by setting the dead time to skip the unresponsive server host entries. When the system performs authentication with the authentication server, it attempts one server at a time. If the attempted server does not respond, the system will attempt the next server. When the system finds a server does not respond, it will mark the server as down, start a dead time timer, and skip them in authentication of the following requests until expiration of the dead time. Click the Apply button to accept the changes made. The fields that can be configured in RADIUS Server Attribute Settings are described below: Parameter RADIUS Server Attribute NAS-IP-Address Description Enter the RADIUS server's attribute NAS-IP-Address here. Click the Apply button to accept the changes made. 89
![](/manual_guide/products/dlink-dgs3630-user-manual-7703634/96.png)