D-Link DGS-3630-52PC User Manual - Page 85
IPv4 Static/Default Route, L3 Features > IPv4 Static/Default Route
View all D-Link DGS-3630-52PC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description Select the Default option to specify that if the default router is selected on this interface, a default route will be installed using that default router. This option can only be specified on one interface. Click the Apply button to accept the changes made. The fields that can be configured for Static IPv6 Address Settings are described below: Parameter IPv6 Address Description Enter the IPv6 address for this IPv6 interface here. Select the EUI-64 option to configure an IPv6 address on the interface using the EUI-64 interface ID. Select the Link Local option to configure a link-local address for the IPv6 interface. Click the Apply button to accept the changes made. After selecting the Interface IPv6 Address tab option, at the top of the page, the following page will be available. Figure 6-9 IPv6 Interface (Detail, Interface IPv6 Address) Window Click the Delete button to delete the specified entry. IPv4 Static/Default Route This window is used to display and configure the default IPv4 route settings. To view the following window, click L3 Features > IPv4 Static/Default Route, as shown below: Figure 6-10 IPv4 Static/Default Route Window The fields that can be configured are described below: Parameter IP Address Mask Description This field cannot be configured in the OpenFlow mode. Only the Default Route is supported. This field cannot be configured in the OpenFlow mode. 78