D-Link DI-754 Product Manual - Page 13
Home > Wireless > 802.11a, Wireless Settings, Apply, Keys 1-4, Key Type, WEP Encryption, Turbo
View all D-Link DI-754 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Using the Configuration Menu Home > Wireless > 802.11a Wireless Settings- choose 802.11a or 802.11b+. Here, 802.11a is selected. SSID- by default the SSID is set to default. All devices on the net- work must share the same SSID. If you change the default setting, the SSID may be up to 32 characters long. ChannelTurbo Mode- 52 is the default channel for 802.11a. All devices on the network must share the same channel. Note: Wireless adapters will automatically scan and match the channel of the Access Point. select ON or OFF. (Note: If you enable Turbo mode on the DI-754 make sure to also enable encryption on all 802.11a wireless clients or wireless connection will not be established.) WEP- select Enabled or Disabled. Disabled is the default setting. (Note: If you enable encryption on the DI-754 make sure to also enable encryption on all 802.11a wireless clients or wireless connection will not be established.) WEP Encryption- select the level of encryption desired: 64, 128 or 152-bit WEP (Wired Equivalent Privacy) Provides security by encrypting data during transmission Key Type- select HEX or ASCII Hexadecimal digits consist of the numbers 0-9 and the letters A-F ASCII (American Standard Code for Information Interchange) is a code for representing English letters as numbers from 0-127 Keys 1-4- input up to 4 WEP keys; select the one you wish to use. Apply- click Apply to save the changes. 13