D-Link DI-754 Product Manual - Page 30
RTS Threshold
![]() |
View all D-Link DI-754 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Using the Configuration Menu Advanced > Performance > 802.11a Wireless Performance- Data RateTransmit PowerBeacon interval- RTS Threshold- Fragmentation- select 802.11a or 802.11b+. Here, 802.11a has been chosen. This screen displays the wireless performance features of the Access Point portion of the DI-754. best is the default selection full is the default selection. beacons are packets sent by an Access Point to synchronize a wireless network. Specify a value. 100 is the default setting and is recommended. this value should remain at its default setting of 2346. If inconsistent data flow is a problem, only a minor modification should be made. this value should also remain at its default setting of 2346 DTIM interval- (Delivery Traffic Indication Message) 1 is the default setting. A DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages. Authentication- select Open system or Shared Key Open System - the DI-754 will be visible to all devices on the network. This is the default setting Shared Key - in this mode, in order to access the DI-754 on the network, the device must be listed in the MAC Address Control List Apply- click Apply to save the changes 30
![](/manual_guide/products/dlink-di754-product-manual-f05e845/30.png)